Cautions - Car Solutions MB2019-NTG6.0-TC2 Instruction Manual

Cautions

1. FQA
Not possible to switch mode
•
- Check connection of OSD Key pad wire
- Check CAN connection
Display wrong size of picture
•
- Check Dip s/w setting
Display black screen in OEM mode
•
- Check connection of LVDS/LCD cable
Not possible to switch to rear screen
•
- Check the packing setting
(OSD Menu – option – RearCam-Det)
2. Caution
The device must not be installed in where it interferes driving
•
(close to brake pedal, steering wheel, airbag etc.)
LVDS cable must be connected correctly according to the manual
•
Insulate the end of wire by using electrical tape
•
The installation should be done by expert
•
GU electronic does not take any responsibility for any problem
•
caused by wrong installation
support@car-solutions.com
car-solutions.com
19