Elation KL FRESNEL 8 PO User Manual page 11

FIXTURE INSTALLATION
CLAMP INSTALLATION
A mounting clamp can be attached to the top of the junior pin for mounting purposes. The device
also features an attachment point for a safety cable on the rear of the housing (see the illustration
below for reference). When mounting the fixture to a truss or any other suspended or overhead
installation, be sure to secure an appropriately rated clamp (not included) to the junior pin and attach
a separate SAFETY CABLE of the appropriate safety rating to the safety cable rigging point.
ALWAYS ATTACH A SAFETY CABLE WHENEVER INSTALLING THIS FIXTURE IN A
SUSPENDED ENVIRONMENT TO ENSURE THAT THE FIXTURE WILL NOT FALL IF
THE CLAMP FAILS.
RIGGING
Overhead rigging requires extensive experience, including but not limited to: calculating working
load limits, understanding the installation material being used, and periodic safety inspection of all
installation material and the fixture itself. If you lack these qualifications, do not attempt to perform
the installation yourself. Improper installation can result in bodily injury.
11