Motor And Feedback Wiring; Figure 3-1: Motor And Feedback Wiring - Aerotech ANT95L Series Hardware Manual

Electrical Specifications and Installation

3.2. Motor and Feedback Wiring

All motor and controller manufacturers have their own designations for motor ØA/ØB/ØC and Hall signals
A/B/C (refer to Section 3.5.
connections.
28
for motor phasing). Shielded cables are required for the motor and feedback
Figure 3-1: Motor and Feedback Wiring
Chapter 3
ANT95L Hardware Manual
www.aerotech.com