22
Place I-Series on surface near stand head, within reach of
cable. Remove cable door (A), plug in power cable (B)
and replace cable door (C) as shown.
B
A
C
23
Mount I-Series, then add bottom VESA screws:
Add (2) screws from bag "M" (15") or bag "N" (22") to bottom
75mm VESA positions.
Route, LAN cable
through bottom of stand head. Route
Hub
cable or other
USB
Add tie-wrap
if used.
Skip to step
© Copyright 2021 Elo Touch Solutions, Inc.
USB
28
16