Cumberland Hi-Lo Parts Manual
  1. Manuals
  2. Brands
  3. Cumberland Manuals
  4. Farm Equipment
  5. Hi-Lo
  6. Parts manual

Cumberland Hi-Lo Parts Manual

Pan feeder
Hide thumbs Also See for Hi-Lo:
Table of Contents

Advertisement

Quick Links

Download this manual
Hi-Lo and PRO-1 Pan Feeder Parts
(For installation, refer to PNEG-250)
Parts Manual
PNEG-250-PM
Version: 19.0
Date: 07-07-20
PNEG-250-PM

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Hi-Lo and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Cumberland Hi-Lo

Summary of Contents for Cumberland Hi-Lo

  • Page 1 Hi-Lo and PRO-1 Pan Feeder Parts (For installation, refer to PNEG-250) Parts Manual PNEG-250-PM Version: 19.0 Date: 07-07-20 PNEG-250-PM...
  • Page 2 All information, illustrations, photos and specifications in this manual are based on the latest information available at the time of publication. The right is reserved to make changes at any time without notice. PNEG-250-PM Hi-Lo and PRO-1 Pan Feeder Parts...

  • Page 3: Table Of Contents

    Housing Assembly, End Control (C2000430) ..................37 Hi-Lo Electrical Components (7100211) ....................38 Hi-Lo Breeder i-Plus3 End Control Pan 1-3/4" (220V, 1 PH) (C2000668) ...........40 Hi-Lo i-Plus3 End Control Pan (220V, 1 PH) (C2000532) ..............42 “E” Feeder i-Plus3 End Control Pan (220V, 1 PH) (C2000559) ............44 Hi-Lo i-Plus3 Center House Control Pan (220V, 1 PH) (C2000560) ............46...

  • Page 4: Chapter 1 Introduction

    Because the first 7-10 days of a broiler’s life are critical, the Hi-Lo Pan Feeder rests on the house floor and presents a lip height of 2.1" (5.334 cm) the average height of traditional “feeder lids”. Young chicks can easily get in and out of the pan and are eating out of the pan from day one.

  • Page 5: Chapter 2 Safety

    Personnel operating or working around equipment must read this manual. This manual must be delivered with equipment to its owner. Failure to read this manual and its safety instructions is a misuse of the equipment. ST-0001-4 PNEG-250-PM Hi-Lo and PRO-1 Pan Feeder Parts...

  • Page 6: Cautionary Symbols Definitions

    This symbol is used to address practices not related to NOTICE personal injury. This symbol indicates a general hazard. This symbol indicates a prohibited activity. This symbol indicates a mandatory action. ST-0005-2 PNEG-250-PM Hi-Lo and PRO-1 Pan Feeder Parts...

  • Page 7: Safety Cautions

    • Never service equipment while it is operating. Keep hands, feet, and clothing away from moving parts. • Keep your equipment in proper working condition. Replace worn or broken parts immediately. ST-0003-1 PNEG-250-PM Hi-Lo and PRO-1 Pan Feeder Parts...
  • Page 8 Only genuine Cumberland parts are to be used in installation and use of the Pan Feeder System. Use of other non-genuine parts is a misuse of the system and may lead to dangerous situations imperilling the safety and health of you and others.
  • Page 9 Throughout this manual, guards are removed for illustration purposes only. All guards must be in place before and during operation. For guidance or assistance on any issues relating to the safe use of Pan Feeder System, Contact: Cumberland 1004 E. Illinois St. Assumption, IL. 62510 Phone: 1-217-226-4421 PNEG-250-PM Hi-Lo and PRO-1 Pan Feeder Parts...

  • Page 10: Safety Sign-Off Sheet

    Below is a sign-off sheet that can be used to verify that all personnel have read and understood the safety instructions. This sign-off sheet is provided for your convenience and personal record keeping. Date Employee Name Supervisor Name ST-0007 PNEG-250-PM Hi-Lo and PRO-1 Pan Feeder Parts...

  • Page 11: Chapter 3 Decals

    ROTATING AUGER CAN mount and the Rotating Auger DC-992 CRUSH AND CUT. housing Can Crush and Keep clear of moving assemby for parts. Disconnect and center control lockout power before servicing. DC-992 GSI Group 217-226-4421 PNEG-250-PM Hi-Lo and PRO-1 Pan Feeder Parts...
  • Page 12 Electrical Control Box Lid for Hi-Lo Decal, European DC-850 Control Pan Certification Switch Box Assembly DC-850 Electrical Control Box Lid Decal, I-Plus3 DC-2282 for i-Plus3 Control Pan Control Pan DC-2282 US Pat #8915214 PNEG-250-PM Hi-Lo and PRO-1 Pan Feeder Parts...
  • Page 13 GSI Group, Inc. 217-226-4421 DC-993 WARNING SHEAR POINT Decal, Warning Winch DC-857 Keep hands clear of Rotating Auger drum and cables. Disconnect and lockout power before servicing. GSI Group Inc. 217-226-4421 DC-857 PNEG-250-PM Hi-Lo and PRO-1 Pan Feeder Parts...
  • Page 14 (See Page 37.) 15. Hi-Lo Electrical Components (7100211) - (See Pages 38-39.) 16. Hi-Lo Breeder i-Plus3 End Control Pan 1-3/4" (220V, 1 PH) (C2000668) - (See Pages 40-41.) 17. Hi-Lo i-Plus3 End Control Pan (220V, 1 PH) (C2000532) - (See Pages 42-43.) 18.
  • Page 15 (See Page 75.) 37. Winch Assembly Parts - (See Pages 76-77.) 38. 650 Lbs. Hopper Scale Assembly (7100751) - (See Page 78.) 39. 650 Lbs. Hopper Scale Sub-Assembly (C2000297) - (See Page 79.) PNEG-250-PM Hi-Lo and PRO-1 Pan Feeder Parts...

  • Page 16: Chapter 4 Parts List

    4. Parts List Hi-Lo Pan Feeder (7098851 and 7101255) Hi-Lo Pan Feeder (7098851 and 7101255) Parts List Ref # Part # Description 7101255 Hi-Lo Feeder (8 Spoke) 7098851 Hi-Lo Feeder (14 Spoke) 7101254 Hi-Lo Grill (8 Spoke) 7098856 Hi-Lo Grill (14 Spoke)

  • Page 17: Hi-Lo Plus Pan Feeder Parts (C2000702 And C2000703)

    4. Parts List Hi-Lo Plus Pan Feeder Parts (C2000702 and C2000703) Hi-Lo Plus Pan Feeder (C2000702 and C2000703) Parts List Ref # Part # Description C2000702 Hi-Lo Plus Feeder (8 Spoke) C2000703 Hi-Lo Plus Feeder (14 Spoke) C2000690 Cap, Hi-Lo Plus Top...

  • Page 18: Hi-Lo Plus Retrofit Kit Parts (C2000706)

    4. Parts List Hi-Lo Plus Retrofit Kit Parts (C2000706) Hi-Lo Plus Retrofit Kit (C2000706) Parts List Ref # Part # Description C2000706 Hi-Lo Plus Retrofit Kit C2000690 Cap, Hi-Lo Plus Top C2000694 Ring, Hi-Lo Plus Thread Adjustment C2000689B Tube, Hi-Lo Plus Drop...

  • Page 19: Pro-1 Assembly

    Part # Description 7101254 Hi-Lo Grill (8 Spoke) C2000215 Two-Piece Drop Tube C2000209 Drop Tube Extension C2000212 Locking Collar C2000210 Lower Drop Tube C2000307 Clear Window Guard C2000211 Feed Level Adjustor 7098857 Pan, Hi-Lo PNEG-250-PM Hi-Lo and PRO-1 Pan Feeder Parts...

  • Page 20: E" Feeder Assembly (Short Cone) (C2000416S And C2000423S)

    Part # Description C2000684 Pan “E” Feeder, Short Cone C2000415 Skirt “E” Feeder C2000596 Tube Drop Bottom, “E” Feeder, 2 Piece, Extended C2000413 Grill “E” Feeder C2000410 Cap “E” Feeder 2 Piece Drop PNEG-250-PM Hi-Lo and PRO-1 Pan Feeder Parts...

  • Page 21: Hi-Lo Center House Control Pan With Microswitch (7101534)

    4. Parts List Hi-Lo Center House Control Pan with Microswitch (7101534) PNEG-250-PM Hi-Lo and PRO-1 Pan Feeder Parts...
  • Page 22 4. Parts List Hi-Lo Center House Control Pan with Microswitch (7101534) (Continued) PNEG-250-PM Hi-Lo and PRO-1 Pan Feeder Parts...
  • Page 23 4. Parts List Hi-Lo Center House Control Pan with Microswitch (7101534) Parts List Ref # Part # Description 7101534 Hi-Lo Center House Control Pan with Microswitch 7101539 Base Plate Assembly 7101536 Inner Plate Assembly 7101538 Lid Assembly 7101400 Paddle Rest for Micro Control Pan...

  • Page 24: Hi-Lo End Control Pan With Microswitch (7101482)

    4. Parts List Hi-Lo End Control Pan with Microswitch (7101482) PNEG-250-PM Hi-Lo and PRO-1 Pan Feeder Parts...
  • Page 25 4. Parts List Hi-Lo End Control Pan with Microswitch (7101482) (Continued) PNEG-250-PM Hi-Lo and PRO-1 Pan Feeder Parts...
  • Page 26 4. Parts List Hi-Lo End Control Pan with Microswitch (7101482) (Continued) PNEG-250-PM Hi-Lo and PRO-1 Pan Feeder Parts...
  • Page 27 4. Parts List Hi-Lo End Control Pan with Microswitch (7101482) Parts List Ref # Part # Description 7101482 Hi-Lo End Control Pan with Microswitch 7101485A Body Assembly, End Control 7101342 Base Plate for Micro Control Pan 7091666 Anchor Plate C2200010...

  • Page 28: Electrical Box Assembly For Micro Control 3 Phase (07101483-3)

    4. Parts List Electrical Box Assembly for Micro Control 3 Phase (07101483-3) PNEG-250-PM Hi-Lo and PRO-1 Pan Feeder Parts...
  • Page 29 Tape, Foam Pad, 1 x 1 DC-851 Decal, CE Electrical Hazard DC-889 Decal, Danger High Voltage S-3674 #10-24 Washer Zinc S-2010 Nylock Nut #10-24 ZN Grade 2 C2000591 Wire Assembly, 5", 16GA BLK PNEG-250-PM Hi-Lo and PRO-1 Pan Feeder Parts...

  • Page 30: Electrical Box Assembly For Micro Control (7101483)

    4. Parts List Electrical Box Assembly for Micro Control (7101483) PNEG-250-PM Hi-Lo and PRO-1 Pan Feeder Parts...
  • Page 31 Shroud, for 16" Motor Cord 7100348 Cord, 120" Long, 16/3 SJT 7100350 Cord, 28" Long, 16/3 SJT S-6555 Connector, 14-16 Gauge Butt Splice Panduit# BSV14X-M (Insulated) S-3674 Flat Washer, #10 Type "A" ZN / Clear PNEG-250-PM Hi-Lo and PRO-1 Pan Feeder Parts...

  • Page 32: Housing Assembly, Center Control (Prox, Plunger) (C2000526)

    Housing Assembly, Center House Control C2000543 Inlet/Outlet Tube Assembly, Center House Control Pan C2000520A Top Cover S-280 Screw, SDS #10-16 x 5/8" HWH ZN DC-992 Decal, Danger - Rotating Auger can Crush and Cut PNEG-250-PM Hi-Lo and PRO-1 Pan Feeder Parts...

  • Page 33: Housing Assembly, End Control (Prox, Plunger) (C2000431)

    C2000428 Motor Mount, End Control Pan S-280 Screw, SDS #10-16 x 5/8" HWH ZN S-1429 Bolt, HHCS 1/4"-20 x 3/4" ZN Grade 2 DC-992 Decal, Danger - Rotating Auger Can Crush And Cut PNEG-250-PM Hi-Lo and PRO-1 Pan Feeder Parts...

  • Page 34: End Control Assembly, Plunger (C2000434)

    4. Parts List End Control Assembly, Plunger (C2000434) PNEG-250-PM Hi-Lo and PRO-1 Pan Feeder Parts...
  • Page 35 Hi-Lo Electrical Components for Prox S-1102 Hex Nut 1/4"-20 ZN Grade 2 S-8977 Screw, TCSF #10-32 x 3/4" HWH ZN 7098247 Drive Mount Hardware Package BX-284 Box, 15-1/2" x 13-3/4" x 14-1/4" 200 C RSC PNEG-250-PM Hi-Lo and PRO-1 Pan Feeder Parts...

  • Page 36: Electrical Box Assembly, (Center House Spinner) (C2000525)

    Gasket, 4" x 4" x 3/16" PVC Lid FLX-2689 Electrical Box Lid S-7931 Hex Nut #10-24 SS S-995 Screw, MS #10-24 x 1" PHP SS E171-A1017 DC Spinner Motor DC-851 Decal, CE Electrical Hazard DC-889 Decal, Danger High Voltage PNEG-250-PM Hi-Lo and PRO-1 Pan Feeder Parts...

  • Page 37: Housing Assembly, End Control (C2000430)

    Lid Assembly C2000427A Outlet Plate Assembly S-280 Screw, SDS #10-16 x 5/8" HWH ZN S-1429 Bolt, HHCS 1/4"-20 x 3/4" ZN Grade 2 DC-992 Decal, Danger - Rotating Auger Can Crush And Cut PNEG-250-PM Hi-Lo and PRO-1 Pan Feeder Parts...

  • Page 38: Hi-Lo Electrical Components (7100211)

    4. Parts List Hi-Lo Electrical Components (7100211) PNEG-250-PM Hi-Lo and PRO-1 Pan Feeder Parts...
  • Page 39 Shroud, for 16" Motor Cord 7100348 Cord, 120" Long, 16/3 SJT 7100350 Cord, 28" Long, 16/3 SJT 7100409 Terminal, Female Barrel Insulator Carlton Bates, BRA-1856 20-5086 Terminal, Ring #10 Stud 18-14 Gauge DC-1188 Decal, Feed Level Switch PNEG-250-PM Hi-Lo and PRO-1 Pan Feeder Parts...

  • Page 40: Hi-Lo Breeder I-Plus3 End Control Pan 1-3/4" (220V, 1 Ph) (C2000668)

    4. Parts List Hi-Lo Breeder i-Plus3 End Control Pan 1-3/4" (220V, 1 PH) (C2000668) PNEG-250-PM Hi-Lo and PRO-1 Pan Feeder Parts...
  • Page 41 4. Parts List Hi-Lo Breeder i-Plus3 End Control Pan 1-3/4" (220V, 1 PH) (C2000668) Parts List Ref # Part # Description C2000668 Hi-Lo Breeder i-Plus3 End Control Pan 1-3/4" (220V, 1 PH) C2000431 Housing Assembly, End Control (Prox, Plunger) C2000552...

  • Page 42: Hi-Lo I-Plus3 End Control Pan (220V, 1 Ph) (C2000532)

    4. Parts List Hi-Lo i-Plus3 End Control Pan (220V, 1 PH) (C2000532) PNEG-250-PM Hi-Lo and PRO-1 Pan Feeder Parts...
  • Page 43 4. Parts List Hi-Lo i-Plus3 End Control Pan (220V, 1 PH) (C2000532) Parts List Ref # Part # Description C2000532 Hi-Lo i-Plus3 End Control Pan (220V, 1 PH) C2000431 Housing Assembly, End Control (Prox, Plunger) C2000552 Control Pan Drop Tube...

  • Page 44: E" Feeder I-Plus3 End Control Pan (220V, 1 Ph) (C2000559)

    4. Parts List “E” Feeder i-Plus3 End Control Pan (220V, 1 PH) (C2000559) PNEG-250-PM Hi-Lo and PRO-1 Pan Feeder Parts...
  • Page 45 Locking Collar, “E” Feeder Control Pans 7098556 Shroud, for 16'' Motor Cord 7098247 Drive Mount Hardware Package PNEG-1864 Instruction, Wiring Diagram, IR Sensor BX-284 Box, 15-1/2" x 13-3/4" x 14-1/4" 200 C, RSC PNEG-250-PM Hi-Lo and PRO-1 Pan Feeder Parts...

  • Page 46: Hi-Lo I-Plus3 Center House Control Pan (220V, 1 Ph) (C2000560)

    4. Parts List Hi-Lo i-Plus3 Center House Control Pan (220V, 1 PH) (C2000560) PNEG-250-PM Hi-Lo and PRO-1 Pan Feeder Parts...
  • Page 47 4. Parts List Hi-Lo i-Plus3 Center House Control Pan (220V, 1 PH) (C2000560) Parts List Ref # Part # Description C2000560 Hi-Lo i-Plus3 Center House Control Pan (220V, 1 PH) C2000526 Housing Assembly, Center Control (Prox, Plunger) C2000552 Control Pan Drop Tube...

  • Page 48: E" Feeder I-Plus3 Center House Control Pan (220V, 1 Ph) (C2000562)

    4. Parts List “E” Feeder i-Plus3 Center House Control Pan (220V, 1 PH) (C2000562) PNEG-250-PM Hi-Lo and PRO-1 Pan Feeder Parts...
  • Page 49 Lock Nut #8-32 KEP Hz Zinc C2000772 Locking Collar, “E” Feeder Control Pans 7099545 Hi-Lo Center House Control Clamp Package PNEG-1864 Instruction, Wiring Diagram, IR Sensor BX-284 Box, 15-1/2" x 13-3/4" x 14-1/4" 200 C, RSC PNEG-250-PM Hi-Lo and PRO-1 Pan Feeder Parts...

  • Page 50: Center Control Assembly (Bolt-On), Ir Sensor (220V, 1 Ph) (C2000645)

    4. Parts List Center Control Assembly (Bolt-On), IR Sensor (220V, 1 PH) (C2000645) PNEG-250-PM Hi-Lo and PRO-1 Pan Feeder Parts...
  • Page 51 Lock Nut #8-32 KEP Hz Zinc S-1102 Hex Nut 1/4"-20 ZN Grade 2 7099545 Hi-Lo Center House Control Clamp Package PNEG-1864 Instruction, Wiring Diagram, IR Sensor BX-284 Box, 15-1/2" x 13-3/4" x 14-1/4" 200 C, RSC PNEG-250-PM Hi-Lo and PRO-1 Pan Feeder Parts...

  • Page 52: E" Feeder I-Plus3 (Bolt-On) Center House Control Pan (220V, 1 Ph) (C2000683)

    4. Parts List “E” Feeder i-Plus3 (Bolt-On) Center House Control Pan (220V, 1 PH) (C2000683) PNEG-250-PM Hi-Lo and PRO-1 Pan Feeder Parts...
  • Page 53 Decal, Rotating Auger Hazard C2000772 Locking Collar, “E” Feeder Control Pans 7099545 Hi-Lo Center House Control Clamp Package PNEG-1864 Instruction, Wiring Diagram, IR Sensor BX-284 Box, 15-1/2" x 13-3/4" x 14-1/4" 200 C, RSC PNEG-250-PM Hi-Lo and PRO-1 Pan Feeder Parts...

  • Page 54: Nutrapan I-Plus3 End Control Pan (220V, 1 Ph) (C2000555)

    4. Parts List Nutrapan i-Plus3 End Control Pan (220V, 1 PH) (C2000555) PNEG-250-PM Hi-Lo and PRO-1 Pan Feeder Parts...
  • Page 55 Lock Nut #8-32 KEP Hz Zinc 7097341 Grilled Feeder Control Unit 7098556 Shroud, for 16" Motor Cord 7098247 Drive Mount Hardware Package PNEG-1864 Instruction, Wiring Diagram, IR Sensor BX-284 Box, 15-1/2" x 13-3/4" x 14-1/4" 200 C, RSC PNEG-250-PM Hi-Lo and PRO-1 Pan Feeder Parts...

  • Page 56: Nutrapan I-Plus3 Center House Control Pan (220V, 1 Ph) (C2000561)

    4. Parts List Nutrapan i-Plus3 Center House Control Pan (220V, 1 PH) (C2000561) PNEG-250-PM Hi-Lo and PRO-1 Pan Feeder Parts...
  • Page 57 Threaded Stud, #8-32 x 3/4", Zinc Plated 1001-2597 Lock Nut #8-32 KEP Hz Zinc 7099545 Hi-Lo Center House Control Clamp Package PNEG-1864 Instruction, Wiring Diagram, IR Sensor BX-284 Box, 15-1/2" x 13-3/4" x 14-1/4" 200 C, RSC PNEG-250-PM Hi-Lo and PRO-1 Pan Feeder Parts...

  • Page 58: 120 Lbs. Feed Hopper (7098232)

    Bolt, HHTB 5/16"-18 x 3/4" ZN Grade 5 S-1147 Split Lock Washer 5/16" ZN S-7484 Hex Nut 5/16"-18 JS Grade 5 C2000420 Hopper Suspension Bracket S-10268 Flange Nut 5/16"-18 JS Grade 5 7101093 Hopper Lid (Screen)/120 Lbs., 200 Lbs. PNEG-250-PM Hi-Lo and PRO-1 Pan Feeder Parts...

  • Page 59: 200 Lbs. Feed Hopper (7098256)

    Hex Nut 5/16"-18 JS Grade 5 S-2041 Split Lock Washer 1/4" ZN S-1102 Hex Nut 1/4"-20 ZN Grade 2 C2000421 Hopper Suspension Cable Guide S-10268 Flange Nut 5/16"-18 JS Grade 5 C2000420 Hopper Suspension Bracket PNEG-250-PM Hi-Lo and PRO-1 Pan Feeder Parts...

  • Page 60: 300 Lbs. Feed Hopper (7098715)

    Bolt, HHTB 5/16"-18 x 3/4" ZN Grade 5 S-10268 Flange Nut 5/16"-18 JS Grade 5 C2000566 Hopper Suspension Bracket C2000567 Hopper Suspension Support Bracket S-1196 Bolt, HHCS 5/16"-18 x 1" ZN Grade 5 PNEG-250-PM Hi-Lo and PRO-1 Pan Feeder Parts...

  • Page 61: 400 Lbs. Feed Hopper (7099426)

    Hopper Suspension Support Bracket S-1196 Bolt, HHCS 5/16"-18 x 1" ZN Grade 5 S-6674 Screw, MS 1/4"-20 x 1/2" THS ZN Grade 2 S-2041 Split Lock Washer 1/4" ZN S-1102 Hex Nut 1/4"-20 ZN Grade 2 PNEG-250-PM Hi-Lo and PRO-1 Pan Feeder Parts...

  • Page 62: Single Boot Assembly

    Nylock Nut #10-24 ZN Grade 2 S-7139 Screw, MS #10-24 x 3/8" HWHS ZN S-7307 Nylock Nut 1/4"-20 SS S-8169 Spring Pin 3/16" x 1" Roll Type S-853 Bolt, HHCS 1/4"-20 x 1-1/2" ZN Grade 2 PNEG-250-PM Hi-Lo and PRO-1 Pan Feeder Parts...

  • Page 63: Double Boot Assembly

    Nylock Nut #10-24 ZN Grade 2 S-7139 Screw, MS #10-24 x 3/8" HWHS ZN S-7307 Nylock Nut 1/4"-20 SS S-8169 Spring Pin 3/16" x 1" Roll Type S-853 Bolt, HHCS 1/4"-20 x 1-1/2" ZN Grade 2 PNEG-250-PM Hi-Lo and PRO-1 Pan Feeder Parts...

  • Page 64: Feed Level Control Switch (7051400)

    4. Parts List Feed Level Control Switch (7051400) PNEG-250-PM Hi-Lo and PRO-1 Pan Feeder Parts...
  • Page 65 Hex Nut #10-24 Grade 2 FH-1310 Connector, Cord Heyco #3231 Replaces: 006-1235-8 FH-1309 Lock Nut 1/2" with Pipe Threads S-1430 1/4" Flat Washer S-4198 Nut, Wing 1/4"-20 ZN Grade 2 7098183 22" Cord Assembly PNEG-250-PM Hi-Lo and PRO-1 Pan Feeder Parts...

  • Page 66: Flex-Flo Hopper Level Control Assembly

    4. Parts List Flex-Flo Hopper Level Control Assembly PNEG-250-PM Hi-Lo and PRO-1 Pan Feeder Parts...
  • Page 67 S-8771 Screw, MS #10-24 x 3/8" RHP ZN Grade 2 S-6151 Lock Washer, #10 S-7319 Screw, MS #6-32 x 7/8" RHS ZN Grade 2 S-6144 Hex Nut #6-32 Grade 2 FLX-3981 Mounting Bracket PNEG-250-PM Hi-Lo and PRO-1 Pan Feeder Parts...

  • Page 68: Flex-Flo Level Control Switch (Flx-3802)

    4. Parts List Flex-Flo Level Control Switch (FLX-3802) PNEG-250-PM Hi-Lo and PRO-1 Pan Feeder Parts...
  • Page 69 Electrical Box Cover FLX-3943 Paddle Retainer S-6161 #10-16 x 3/8" Washer Head Self-tapping Screw S-7319 Screw, MS #6-32 x 7/8" RHS ZN Grade 2 FLX-3982 Mounting Bracket Holder S-6381 Heyco 1247 Strain Relief PNEG-250-PM Hi-Lo and PRO-1 Pan Feeder Parts...

  • Page 70: Winching And Miscellaneous Accessories

    4. Parts List Winching and Miscellaneous Accessories PNEG-250-PM Hi-Lo and PRO-1 Pan Feeder Parts...
  • Page 71 Cable, 3/16" - 7 x 7 Galvanized Aircraft Main Line -1000' Spool 07097392-1M Cable, 1/8" - 7 x 7 Galvanized Drop 1000' Spool CW-2008-1M Cord, 1/8"-#4 White Solid Braided - 1000' Spool * Parts 1-6 appear on Page 70; parts 7-19 appear on Page PNEG-250-PM Hi-Lo and PRO-1 Pan Feeder Parts...
  • Page 72 4. Parts List Winching and Miscellaneous Accessories (Continued) PNEG-250-PM Hi-Lo and PRO-1 Pan Feeder Parts...
  • Page 73 Cable, 3/16" - 7 x 7 Galvanized Aircraft Main Line -1000' Spool 07097392-1M Cable, 1/8" - 7 x 7 Galvanized Drop 1000' Spool CW-2008-1M Cord, 1/8"-#4 White Solid Braided - 1000' Spool * Parts 1-6 appear on Page 70; parts 7-19 appear on Page PNEG-250-PM Hi-Lo and PRO-1 Pan Feeder Parts...

  • Page 74: Ceiling Unit Parts

    Base, Relay, 3 PDT, Small Square 7097529 Switch Activator Block E171-A1096 Winch Channel Clip with Stud S-4198 Nut, Wing 1/4"-20 ZN Grade 2 7097640 Overhead Control Box Plate S-6150 6 Gang Enclosed Terminal Block PNEG-250-PM Hi-Lo and PRO-1 Pan Feeder Parts...

  • Page 75: Main Control Parts

    Enclosure, 8 x 6 x 4 Non-Metal 7097542 Control Box Mount Plate 7097641 Main Control Box Plate E160-1137 Lug, Ground, #TA-2 (CSA) 7097426 Switch, Momentary FLX-3413 Timer, 24 Hour 208V-277V, Pin Type Settings HH-1442 Switch, SPST 10A-125V Toggle PNEG-250-PM Hi-Lo and PRO-1 Pan Feeder Parts...

  • Page 76: Winch Assembly Parts

    4. Parts List Winch Assembly Parts PNEG-250-PM Hi-Lo and PRO-1 Pan Feeder Parts...
  • Page 77 Sheave, AK39/MA38 x 5/8" Bore 7097586 28" V-Belt S-6077 Bolt, U-Bolt 3/8"-16 x 1" Wide x 2-1/4" Long ZN 7097632F Motor, 1/3 HP 1 PH 60 Hz 115V-208V 7099608 Manual Drive Yoke Weldment PNEG-250-PM Hi-Lo and PRO-1 Pan Feeder Parts...

  • Page 78: 650 Lbs. Hopper Scale Assembly (7100751)

    Ref # Part # Description 7100751 650 Lbs. Hopper Scale Assembly C2000297 650 Lbs. Hopper Scale Sub-Assembly 7100655 Hopper Scale Hanger 300#, 400#, 550# 7100654 Hopper Scale Hanger 120#, 200# 7100484 Hopper, Scale GS3000 PNEG-250-PM Hi-Lo and PRO-1 Pan Feeder Parts...

  • Page 79: 650 Lbs. Hopper Scale Sub-Assembly (C2000297)

    Screw, TCSF #10-32 x 1/2" HWH ZN 7100484 Hopper, Scale GS3000 7100653 Frame Hanger S-248 Flat Washer 3/8" x 7/16" I.D. x 1" O.D. YDP S-7062 Eye Bolt 3/8"-16 x 2-1/4" Zinc S-7489 Hex Nut 3/8"-16 JS500 Grade 5 PNEG-250-PM Hi-Lo and PRO-1 Pan Feeder Parts...
  • Page 80 4. Parts List PNEG-250-PM Hi-Lo and PRO-1 Pan Feeder Parts...

  • Page 81: Chapter 5 Warranty

    GSI warrants, subject to all other conditions described in this Warranty, Service Parts which it manufactures for a period of 12 months from the date of purchase, unless specified in Enhancements above. Parts not manufactured by GSI will carry the Manufacturer’s Warranty. (Protein Limited Warranty_REV01_06 November 2018) PNEG-250-PM Hi-Lo and PRO-1 Pan Feeder Parts...
  • Page 82 This equipment shall be installed in accordance with the current installation codes and applicable regulations, which should be carefully followed in all cases. Authorities having jurisdiction should be consulted before installations are made. 1004 E. Illinois St. Assumption, IL 62510-0020 Phone: 1-217-226-4421 Fax: 1-217-226-4420 www.cumberlandpoultry.com...

This manual is also suitable for:

Hi-lo plusPro-170988517101255C2000702C2000703

Table of Contents

Save PDF