Westfalia 81 61 95 Instruction Manual page 11

6. Screw the blind rivet nut on the threaded mandrel and select
right-hand rotation on the drilling tool.
7. Firmly press the blind riveting attachment with the attached
blind rivet nut on the work piece and start the drilling tool with
right-hand rotation. Firmly hold the drilling tool and the blind
riveting attachment with both hands.
8. Finally unscrew the blind riveting attachment from the blind
rivet nut.
Cleaning and Storing
Before cleaning or maintaining, first disconnect the plug from
power mains and make sure the drilling tool cannot get started
inadvertently.
Do not wipe the blind riveting attachment with sharp deter-
gents or aggressive chemicals in order not to damage the
surfaces.
Assembling and Using
10