Westfalia 81 61 95 Instruction Manual page 10

Before first Use
Remove the unit and the accessory out of the packaging. Keep
packaging materials out of reach of children.
Assembling and Using
1. Unscrew the head (3) of the blind riveting attachment by
turning counter clockwise. If necessary use a wrench of the
size 23. Select the suitable
nosepiece (5) and the
threaded mandrel (4) for
the used blind rivet nut.
Screw the threaded man-
drel on the collet of the head.
2. Lightly press down the head (3)
while screwing on the blind riveting
attachment.
3. Use the included wrench (6) in order
to tighten the nosepiece (5) on the
head (3) of the blind riveting attach-
ment.
4. Attach the blind riveting attachment
as a bit into the drill chuck of the
drilling tool. According to the size of
the blind rivet nut adjust the torque
of the drilling tool. Always start with
the lowest torque.
5. Hold the blind riveting attachment
firmly in your hand and start the
drilling tool with left-hand rotation. Allow the tool to run slowly
until you hear a click sound. Now the collet inside the blind
riveting attachment is completely opened and ready for insert-
ing a blind rivet nut.
Assembling and Using
9