CP331
General-Purpose Interface
The 8-pin row connector CON 10 provides access to the general-purpose signals of the
LVDS cable, such as touch screen I/O, mouse, keyboard etc. This connector is available
on the CP331-LVDS variant only.
Table 2-6: CON 10 Pinouts
CON 10
1
3
5
7
2.4.5
PCI Interface
All variants of the CP331 are equipped with the standard PCI interface J1. For its
pinouts please refer to the PEP Modular Computers CompactPCI System Manual or to
the CompactPCI Specification.
2.4.6
Rear-I/O TTL Interface
All signals from the TTL flatpanel interface are routed to the rear-I/O connector J2.
Page 2 - 10
LVDS
Signal
8
GND
18
GP1
11
GP3
9
GP5
© 2000 PEP Modular Computers GmbH
Functional Description
CON 10
LVDS
2
20
4
21
6
24
8
26
Signal
GP0
GP2
GP4
GP6
ID 19947, Rev. 0200
Need help?
Do you have a question about the CP331 and is the answer not in the manual?