Panellink Adapter Module; System-Relevant Information - PEP Modular Computers CP331 Manual

CP331
A complete list of the physical board interfaces of all board variants is given in the fol-
lowing table:
Table 1-1: Board Variants/Connectivity
Connectivity
Frontpanel
Connectors
On-board
Connectors
* Signals directed to PanelLink connector board.
1.2.3

PanelLink Adapter Module

To the customizable 64-pin on-board connector CON8 of the standard board version a
customer-specific flatpanel adapter can be connected. However, with the CP331 stan-
dard version no throughput of the signals to a frontpanel connecter is foreseen.
The board variant CP331-PL instead is provided with a plug-on module acting as an
adapter between the 64-pin on-board connector CON8 and the 20-pin PanelLink con-
nector on the frontpanel. Therefore, no other connection can be established to the con-
nector CON8 when using the PanelLink adapter module.
1.2.4

System-Relevant Information

In the following information is supplied which must be taken into account before running
or installing a CP331 board in your CompactPCI system.
Operating Systems
The CP331 can operate under the following operating systems:
• Windows 95
• Windows 98
• Windows NT
• Windows 2000
ID 19947, Rev. 0200
CP331
VGA
—
—
CON8
CON9
—
Note...
More than one CP331 board can be installed in a system under
Windows 98 and Windows 2000. With earlier versions of the
Windows operating system only one CP331 can operate in a
system.
© 2000 PEP Modular Computers GmbH
CP331-PL
VGA
—
PanelLink
CON8*
CON9
—
Introduction
CP331-LVDS
VGA
LVDS
—
—
—
CON10
Page 1 - 5