CP331
2.4.3
Front-End TTL Interfaces
LVDS Interface
The LVDS interface of the board variant CP331-LVDS is the standard interface for
remote digital flatpanel connections (up to 10m distance), with resolutions up to USXGA
quality (1280 x 1024). Due to its universal use, it is routed directly on-board. The
installed transmitter chips are the National Semiconductor DS90C5(3)83 or Texas
Instruments SN75LVDS83.
Note...
Dual-scan flat-panels cannot use this interface due to inconsis-
tent clock requirements.
Table 2-2: LVDS Connector Pinouts (Transmitter Side)
Pin
1
VEESAFE
2
TxOut0GND
3
VDDSAFE
4
TxOut1-
5
TxOut1+
6
TxOut2-
7
TxOut2+
8
GND
9
General Purpose 0
10
TxCLKOutGND
11
General Purpose 1
12
TxOut3-
13
TxOut3+
Page 2 - 6
Figure 2-3: Orientation of LVDS Connector
The front-end connector is a 26-pin Mini-Delta Ribbon (MDR) con-
nector which provides all required signals including the 5V and
12V supplies and several control signals used by external key-
boards, touch screens or similar peripheral devices.
Embedded within the LVDS cable are the +5V DC, +12V DC and
control lines required for remote display connection together with
additional (general purpose) lines provided for touch panel dis-
plays, keyboards, mouse, etc.
The pinouts of the LVDS connector is compliant with Apllication
Note AN-1085 FPD-Link by National Semiconductors as shown in
the below table.
Signal
© 2000 PEP Modular Computers GmbH
Functional Description
Pin
14
TxOut0-
15
TxOut0+
16
12VSAFE
17
TxOut1GND
18
General Purpose 2
19
TxOut2GND
20
General Purpose 3
21
General Purpose 4
22
TxCLKOut-
23
TxCLKOut+
24
General Purpose 5
25
TxOut3Gnd
26
General Purpose 6
Signal
ID 19947, Rev. 0200
Need help?
Do you have a question about the CP331 and is the answer not in the manual?