L3Harris Narda SignalShark 3330 Quick Start And Safety Instructions page 71

5. Slide the coupler (5) over the connector (4).
a. To do this, make sure that the notches in (3) and (4) are aligned.
b. Align the ridge in the coupler (5a) with the notch and slide the coupler
over the seal body fully.
6. Screw the end nut (1) onto the coupler (5) and tighten it hand-tight.
Connecting the power cable to the Outdoor Unit
 The DC coupler has been mounted to the power cable.
 The power cable has been connected to the external power supply.
 Plug the DC coupler into the DC socket on the device input.
 The device starts automatically when supplied with power.
Establishing the network connection
 The SIM card has been inserted into the SIM card slot in the
Outdoor Unit.
 The cellular antenna has been connected.
 Set up your network. Detailed information can be found in the online help
of the Outdoor Unit.
 For how to configure the modem, please refer to the detailed information
issued by the manufacturer.
Narda
SignalShark 3330 Outdoor Unit 71