Opening And Closing The Outdoor Unit - L3Harris Narda SignalShark 3330 Quick Start And Safety Instructions

5.4

Opening and closing the Outdoor Unit

Ingress of moisture
An incorrectly closed housing could result in moisture ingress,
which could lead to malfunctions or catastrophic failure of the
device.
 Reseal the device correctly after opening.
The only reason for opening and closing the housing should be to insert the
SIM card.
The Outdoor Unit is opened and closed at the hexagon socket screws on
the corners of the device housing (see Figure 2: number 2). Both halves of
the housing have an internal thread, which helps to prevent the hexagon
socket screws from falling out accidentally.
Opening the Outdoor Unit
Electrical voltage inside the device
If the device is live and the housing is open, a short circuit could
lead to damage.
 Before you open the device, disconnect the device from the power
supply and protect against inadvertent reinstatement.
Narda
NOTICE
NOTICE
SignalShark 3330 Outdoor Unit 61