Measurement Display; Note On Guest Mode - Bosch+Sohn Boso medicus prestige S User Instructions

Measurement display

After the end of the measurement, the in-
built valve opens automatically and the cuff
deflates rapidly.
The measured blood pressure values
(systole, diastole, pulse) are displayed (see
illustration 7).
EN
:
68
SYS.
mmHg
DIA.
mmHg
PUL.
/min.
Illustration 7
The measurement is stored automatically
(except for guest mode, see below). If the
memory store is full (90 measurements), the
oldest measurement is deleted and the
current one stored.

Note on guest mode:

If a measurement value is not be kept, press
„M" while the measured values are still on
display.
Invalid measurements with an "Err" mess-
age (see page 74) are not stored.
If the symbol
measurement, it is recommended that the
measurement is repeated, holding the
appears after the