Table of Contents
Advertisement
4
INSTALLATION OF PAPER
Moisture, fingerprints or dust on the
paper surface may cause a noise
at printing or deterioration in print
quality. Follow the procedure to
prevent fingerprint or dust on the
paper surface.
Open the door.
Load the paper roll.
INCORRECT
CORRECT
Note:
The printing surface is the
outside. Place the paper with the
thermosensitive side (printing side)
up.
When the paper roll is placed
inversely, images can not be
printed.
Press the OPEN
•
button.
The door opens.
• Place the paper roll
in the printer.
printing side
Pull out the paper end.
Close the door.
Cut the paper end.
Cut the paper end with the cutter by
•
pulling the paper upwards against the
cutter blade.
7
• Pull out the first 15-
20cm (6 in. - 9 in.)
of the paper to
remove any slack
in the roll.
cutter
Advertisement
Table of Contents
