Before You Begin
Install and connect your Adaptec RAID controller and internal disk drives (see
●
Create a bootable array (see
●
Create a driver disk (see the following section).
●
Note:
For up-to-date operating system version support, visit the Adaptec Web Site at
www.adaptec.com. From the main menu select Support>Knowledgebase>Find Answers. Select
your controller type and OS support to generate a list of supported operating systems and to
download the latest drivers.
Creating a Driver Disk
Note:
You will need a floppy disk to complete this task for all operating systems except
Windows Vista, Windows Server 2008, and Windows 7.
To create a driver disk:
Set your system BIOS so that your computer boots from the DVD drive. (For instructions,
1
refer to your computer documentation.)
Turn on your computer, then insert the RAID Controller Installation DVD included in
2
your RAID controller kit.
Click Create Diskette, then select your operating system.
3
Note:
Linux only—If prompted, select your operating system and then the version.
When prompted, insert a floppy disk, then click OK.
4
The system creates the driver disk.
Remove and label the driver disk.
5
Continue with the instructions for your operating system:
6
For Windows, see
●
For Red Hat Linux, see
●
For SUSE Linux, see
●
For OpenServer, see
●
For UnixWare, see
●
For Solaris, see
●
For VMware, see
●
For FreeBSD, see
●
Chapter 7: Installing the Driver and an Operating System
page
43).
page
50.
page
51.
page
51.
page
51.
page
52.
page 52
page
53.
page
53.
49
●
page
35).