Getting Started; Working In The Acu Using Menus - Adaptec 5805 Installation And User Manual

Getting Started

Note:
You need a bootable floppy disk to complete this task.
The ACU for DOS runs from a floppy disk which you can create using the RAID Controller
Installation DVD that came in your Adaptec RAID controller kit.
To create the ACU floppy disk:
Insert your RAID Controller Installation DVD into the DVD drive, then browse to this
1
file:
packages/firmware/controllermodel/acu.exe
Where controllermodel is the model number of your Adaptec RAID controller.
Insert a bootable floppy disk and copy the acu.exe file to it.
2
Continue in one of two ways:
3
Work in the ACU using menus (see the following section)
●
Run the ACU using scripts (see
●

Working in the ACU Using Menus

To work in the ACU using menus:
Insert the ACU floppy disk (see
1
The computer boots to the DOS command line.
Type on the command line, then press Enter.
2
ACU
The ACU is menu-based and instructions for completing tasks appear on-screen. Menus
can be navigated using the arrow, Enter, Esc, and other keys on your keyboard.
For more information about completing tasks, see
Arrays on page
Appendix D: Using the Array Configuration Utility for DOS
page 96)
Getting Started
84.
above), then start or restart your computer.
Using the ACU to Create and Manage
95
●