About The Adaptec Raid 5805Z/5805Zq - Adaptec 5805 Installation And User Manual

About the Adaptec RAID 5805Z/5805ZQ

The Adaptec RAID 5805Z/5805ZQ is a SAS RAID controller with these features:
Form Factor
Bus compatibility
PCIe bus width
PCIe bus speed
Phys (Unified Serial Ports)
Standard cache
Connectors, internal
Maximum number of disk drives
MaxIQ SSD support
Enclosure Support
Onboard speaker
Zero Maintenance Cache
Protection Module
Drive Activity LED connectors for CN0/CN1
Drive Activity LEDs for CN0/CN1
I2C connectors for CN0/CN1
Ext. Alarm connector
Aggregate Activity
Mode 0 Flash connector
Diagnostic LEDs
PCIe x8 connector
Mounting bracket
Low-profile MD2
PCIe
x8
2.5 Gb/s
8
512 MB DDR2
2 mini-SAS x4 (SFF-8087)
8 direct-attached (or up to 256 with expanders)
5805Z: 8 Adaptec MaxIQ-branded/Intel X25-E SSDs (2TB max)
5805ZQ: 8 MaxIQ-compatible SSDs using any Solid State Drive
on compatibility list (2TB max); see
compatibility
I2C and SGPIO
Yes
Adaptec ZMM-100DB daughterboard (pre-installed),
Adaptec ZMM-100CC super cap card (user installed—see
37)
Chapter 3: About Your RAID Controller
CN1
CN0
ZMM-100CC Cap
Card connector
ZMM-100DB
Daughterboard
www.adaptec.com/
27
●
2 internal mini-SAS
connectors
page