Table of Contents
Advertisement
CONNECTION #2 : POWER MODULE WITH MULTIPLE EXTENDED BATTERY MODULES
Step 1: Connect the 1
EBM to the Power module
st
instructions above.
Step 2: Turn off the DC breaker of the 2
Step 3: Loosen the two screws to remove the battery cable
retention bracket of the 1
Step 4: Use the output cable of the 2
EBM to the 1
st
Battery module.
Step 5: Rotate the battery cable retention bracket and tighten
the two screws to fix battery cable.
Step 6: Use a power cord to plug AC input inlet of the 2
module into AC output outlet of the 1
Step 7: Turn on the DC breaker of the 2
Step 8: Set the EBM number to the respective setting to match
the number of installed units. To do this via the LCD
control panel, go to the Configuration Menu, then scroll
to EBM Number setting, select the appropriate number
and Save. This operation can also be done if there is an
RMCARD installed in the UPS, or via PowerPanel®
Business Edition Agent. Please see their respective User
Manuals for instructions.
Copyright © 2017 Cyber Power Systems, Inc.
BASIC OPERATION
using the
EBM.
nd
EBM.
st
EBM to connect the 2
nd
nd
battery
EBM.
st
EBM.
nd
nd
12
Hide quick links:
Advertisement
Table of Contents
