Biomechanical Positioning; Machine Entry Rex7000; Initiating A Workout; Exit The Machine Rex7000 - SCIFIT REX7000-BR User Manual

Machine Entry REX7000

Choose one of the following to position seat for entry.
• Lift and hold the yellow handle located in front of the seat, then move the seat back to allow sufficient entry space and release the
handle. You may grab the handlebars on either side of the console to stabilize yourself and sit on the seat.
• Lift upward on the yellow swivel lever (REX7001 models only) located on either side of the seat and hold, then rotate the seat 90
degrees to the right or left to access the bottom seat pad and release, then sit down and again lift upward on the swivel lever again
and rotate back into the original position.

Initiating a Workout

1. Place your feet on the foot pads or pedals (depends on machine), then grab the handlebars and begin pushing the foot pads or
pedals and handlebars continuously to keep the console powered up.
NOTE: The AC adapter may also be connected to the machine to keep the console continuously powered-up.
2. Select the workout program preferred (see Console Program manual) and begin the workout.

Exit The Machine REX7000

Choose one of the following ways to exit the machine.
1. Lift and hold the yellow handle in front of the seat, then move the seat back to allow sufficient exit space and release. Carefully
lift yourself up and exit the machine.
2. Lift upward on the yellow swivel lever (REX7001 models only) located on either side of the seat and rotate the seat 90 degrees
right or left, then release. Carefully lift yourself upward and exit the machine.

Biomechanical Positioning

Page 13 of 20