Table of Contents
Advertisement
Changing Hook Height from 54" to 61-3/4" Continued:
3.
Tilt the telescopic arm rearward (left control lever backward). See Fig. A (Pg. 3-1).
4.
Continue to tilt telescopic arm rearward until the dump cylinders are fully extended. Replace
lock pin and secure with hitch pin.
WARNING:
Do not remove lock pin on the adjustable jib while jib is in the 54"
hook position and the telescopic arm is tilted rearward (as shown).
Possible property damage and/or personal injury may result.
SL-406.OPE
06/2009
Lock pin secured
with hitch pin
3-6
Advertisement
Table of Contents
