Table of Contents
Advertisement
1.
Select a location to mount the hydraulic tank. Reference Figure F or Drawing No. 90H57
for the suggested location of the hydraulic tank to the rear of the control valve assembly
on the left-hand side of the truck. The hydraulic hoses have been sized for the tank to be
mounted in this general area. The tank can be located on the right-hand side or behind
the cab, if necessary, which means longer hoses may be required.
3.
Drill four (4) holes for 5/8-inch diameter bolts (provided) in the mount angle of the
hydraulic tank (two per angle) and the frame rails of the truck chassis. Mount the
hydraulic tank and install the hydraulic filter. Install the hydraulic return hose and the
hose barb fitting between the filter and the control valve assembly as shown on Drawing
No. 91H13. The hose length can be shortened if necessary. Secure the hose to the barb
fittings with the hose clamps provided.
SL-406.INS
09/2009
HYDRAULIC TANK INSTALLATION
Figure F
2-15
Advertisement
Table of Contents
