Removing inner attachments
CAUTION
Wear rubber gloves when performing maintenance on the chamber. Failure to wear gloves may result
in cuts or abrasions from sharp edges or corners.
Be careful not to damage the UV lamp in the duct (KM-CC17RH2A/CC17RU2A or when an optional UV
system set KM-CCP17US2A is installed).
1. Turn OFF the power to the incubator.
2. Open the outer and inner doors and pull out all the
trays (Fig. 1).
3. Pull out the humidifying pan (Fig. 2).
4. Pull out the humidifying pan cover (Fig. 3).
5. Pull out the fan cover (Fig. 4).
Tray
Humidifying pan
Humidifying pan cover
Fan cover
Fig. 1
Fig. 2
Fig. 3
Fig. 4
21