Advertisement
Note: On the Tools #1 screen, by mistakenly
pressing Temp./CO
Calibration key, Temp./CO
2
2
Calibration screen is displayed.
When this screen is displayed, press Back key to
return to the Tools #1 screen, or press Top key to
return to the Top screen.
When these settings on this screen are changed,
inaccurate temperature or CO
density may be
2
displayed.
●Operation from other than Menu key
gas supply line select key: (Operate) Manual changeover
◆CO
2
between CO
gas supply line A and B (Page 72)
2
◆Message select key:
(Operate) Changing some messages
5
◆H
O
key*
: (Operate) H
O
decontamination (Page 60～65)
2
2
2
2
6
◆Unlock key*
: (Operate) Unlock the outer door. (Page 66～68)
◆Buzzer key: (Operate) Silencing the buzzer (Alarm is not canceled except for some alarms; page 78)
*5: Under any of the following conditions only.
・When an H
O
generator MCO-HP-PW is installed in the KM-CC17RH2A.
2
2
・When all H
O
generator MCO-HP-PW, H
O
decon board KM-CCPHB1A and electric lock KM-CCPL1W
2
2
2
2
in the KM-CC17RU2A.
・ When all UV system set KM-CCP17US2A, H
O
generator MCO-HP-PW, H
O
decon board
2
2
2
2
KM-CCPHB1A and electric lock KM-CCPL1W in the KM-CC17R2A.
*6: For the KM-CC17RH2A or an optional electric lock KM-CCPL1W is installed, when the auto lock
function is ON.
29
Hide quick links:
Advertisement
