Sagitter ARCHERB1 User Manual page 21

Note:
If the wireless is disabled when the projector is linked to other projectors, it will stop to work.
It's possible to connect the projector directly with a DMX cable.
ENTER 3S UNLINK:
With this sub menu it's possible to unlink the wireless. Press and Hold for 3 seconds.
To verify that projector is unlinked, enter on the sub menu STATUS. The writing "UNLINK" will
appear.
STATUS:
In this sub menu you can view the status of Wireless in the projector:
- DMX OK fixed = the projector is LINKED with one transmitter and it receives the correct DMX
signal;
- LINKING / DMX OK (continuous alternation of these two writings) = the projector is correctly
LINKED with one transmitter that is switched ON but disconnected from DMX signal, or the
transmitter is switched OFF;
- UNLINK fixed = The projector is UNLINKED from any transmitter;
5.2 – DMX MODE
Channels mode
13 14 16
1 1 1
2
2 2 3
4
3 5
3 4 6
4 5 7
5 6 8
Function Values
PAN 000 – 255
PAN fine 000 – 255
TILT 000 – 255
TILT fine 000 – 255
Pan/Tilt speed 000 - 225
226 - 235
236 - 245
246 - 255
Dimmer 000 - 255
Strobe 000 - 031
032 - 063
064 - 095
096 - 127
128 - 143
144 - 159
160 - 191
192 - 223
224 - 255
Color wheel 000 – 010
011 – 017
018 – 024
025 – 031
032 – 038
21
Description
Pan movement
Fine Pan movement
Tilt movement
Fine Tilt movement
Speed from max. to min.
Blackout during PAN/TILT movement
Blackout during Colors / Gobo change
No function
Dimmer 0% - 100%
Shutter closed
Shutter open
Strobe from slow to fast
Shutter open
Pulse IN from slow to fast
Pulse OUT from slow to fast
Shutter open
Random strobe from slow to fast
Shutter open
Open
Red
Red + Green
Green
Green + Cyan