Specifications - AuCom PROFINET CARD Instructions Manual

9. Specifications

• Connections
Soft starter .......................................................................... 16-way pin assembly
Contacts ........................................................................................... Gold flash
Network .......................................................................................................... RJ45
• Settings
IP Address ....................................................................... Automatically assigned
Device name .............................................. Automatically assigned, configurable
• Network
Protocols ......................................................................... Profinet MQTT, OPC UA
.... DHCP, ACD (address conflict detection), MRP (media redundancy protocol)
Link speed ........................................................ 10 Mbps, 100 Mbps (auto-detect)
Full duplex
Auto crossover
• Power
Consumption (steady state, maximum) ..................................... 35 mA @ 24 VDC
Reverse polarity protected
Galvanically isolated
• Certification
CE ...................................................................................................... EN 60947-4-2
RCM ..........................................................................................
Profibus & Profinet International ...................................................
Profinet Card (710-16502-00C)
INSTRUCTIONS
IEC 60947-4-2
23