Pci/Pnp Configuration - Acer AT350 F1 Series User Manual

Parameter
Emulation Type

PCI/PnP Configuration

Parameter
Plug & Play OS
SR-IOV
Supported
PCI-U Slot0
Option ROM/
PCI-E Slot2
Option
ROM~PCI-E Slot6
Option ROM
Load Onboard
LAN1 Option
ROM/Load
Onboard LAN2
Option ROM
Description
If set to Auto, USB devices that are
smaller than 530MB will be emulated
as floppy and the remaining will be
emulated as an HDD. The Forced FDD
option will allow you to confi gure an
HDD formatted drive to boot as an
FDD (eg. Zip Drive).
Description
Select Yes to allow the OS to
configure Plug & Play devices. (This is
not required for system boot if your
OS supports Plug & Play.) Select No to
allow the AMI BIOS to confi gure all
devices in the system.
Select Enabled to enable Single-Root
I/O Virtualization (SR-IOV) support,
which works in conjunction with the
Intel Virtualization Technology to
allow multiple operating systems to
run simultaneously within a single
computer via natively shared PCI-
Express devices in order to enhance
network connectivity and
performance.
Select Enabled to enable Option ROM
support for the user to boot
computer using a network interface
from the slots specified above.
Select Enabled to enable the onboard
LAN1 or LAN2 Option ROM. This is to
boot the computer using a network
interface.
83
Options
Auto
Floppy
Forced FDD
Hard Disk
CD ROM
Options
Yes
No
Enabled
Disabled
Enabled
Disabled
Enabled
Disabled