Table of Contents
Advertisement
82
USB Configuration
Parameter
USB Controller
Legacy USB
Support
(Available when
USB Functions is
not Disabled)
USB 2.0
Controller
USB 2.0
Controller
Mode
USB Mass Storage Device Configuration
This feature allows the user to configure the USB Mass Storage Device
Settings.
Parameter
USB Mass
Storage Reset
Delay
Device#1
Description
Select Enabled to enable the onboard
USB controller.
Select Enabled to use Legacy USB
devices. If this item is set to Auto,
Legacy USB support will be
automatically enabled if a legacy USB
device is installed on the
motherboard.
This item indicates if the onboard USB
2.0 controller is activated.
This setting allows you to select USB
2.0 Controller mode.
Description
This setting allows you to decide how
long the system should wait in an
attempt to detect the presence of a
USB Mass Storage Device before it
issues a start command the system to
proceed with the next operation
during POST.
This setting allows the BIOS to display the USB Device#1
detected in the system.
4 System BIOS
Options
Enabled
Disabled
Enabled
Disabled
Auto
Enabled
Disabled
Hi-Speed (480
Mbps)
Full Speed (12
Mbps)
Options
10 seconds
20 seconds
30 seconds
40 seconds
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
