Acer AT350 F1 Series User Manual page 137

Initialing a RAID Volume
1 After you create the logical volumes on all of the RAID volume,
click on Accept and Yes to save the configuration.
2 Click on Yes to initialize the new logical drives. You will see all the
logical drives listed.
3 Click on Home to go back to the configuration menu.
Assigning a Hot Spare Drive
1 Select a free disk marked as UNCONF GOOD and listed under
Physical Drives.
2 Select Make Global Dedicated HSP or Make Dedicated HSP and
click on Go.
3 Click on Home to go back to the configuration menu. You will see
the disk marked as Hotspare in pink and listed under Physical
Drives.
4 Now you can reboot the system and install the operating system.
Select Exit, click on Yes and press <Ctrl> + <Alt> + <Del> to reboot
the system.
125