Table of Contents
Advertisement
4
Select the desired hard drive disk and then press <INS> to add it in
Selected Drives area.
5
Press <Enter> to complete the selection.
6
Select Array Type.
7
Configure the array properties.
8
Press Done when finish.
9
Press Y when prompted by "Do you want to create an array? (Yes/
No):".
10 Press any key to continue.
11 Now that the RAID volume is created, you can press <ESC> to exit.
Assigning Hot Spare drive
A hot spare is a hard disk drive that automatically replaces any failed
drive in a RAID volume, and can subsequently be used to rebuild the
RAID volume.
1
Select Array Configuration Utility option.
2
Select Add/Delete Hotspare.
3
The screen displays Select drives to assign Spare.
4
Select desired hard drive disk and then press <INS> to add it in
Assigned Hotspare drives area.
5
Press <Enter> to complete the selection.
6
Press Y when prompted by "Do you want to create a spare? (Yes/
No):" displayed.
7
Now a hot spare drive is created, you can press <ESC> to exit.
97
Advertisement
Table of Contents
Troubleshooting
