Advertisement
Danger of explosion if battery is incorrectly replaced. Replace only
with the same or equivalent type recommended by the
manufacture. Discard used batteries according to following caution:
/
Disposal of lithium batteries should be performed by permitted,
professional disposal firms knowledgeable in state government
federal and local hazardous materials and hazardous waste
transportation and disposal requirements. / Battery continues to
have no transportation limitations as long as they are separated to
prevent short circuits and packed in strong packaging. /
Commercial firms that dispose of any quantity of lithium cells
should have a mechanism in place to account for their ultimate
disposition. This is a good practice for all types of commercial or
industrial waste. /
Recommend Type Number: / CR2354 (BATT) Manufactured by
MATSUSHITA
1.4. FOR SERVICE TECHNICIANS
ICs and LSIs are vulnerable to static electricity. / When repairing, the following precautions will
help prevent recurring malfunctions.
1. Cover the plastic parts boxes with aluminum foil.
2. Ground the soldering irons.
3. Use a conductive on the worktable.
4. Do not touch IC or LSI pins with bare fingers.
Warning:
Static sensitive devices are used. To
printed circuit boards from static electricity,
do not touch connectors indicated to
To discharge body static, touch ground
wear a grounding strap.
3
Advertisement
