Acer AR320 F1 Series User Manual page 84

66
Parameter
SATA Mode
Selection
SATA Port
0/1/2/3/4/5
Type
Multisector
Transfer
LBA Mode
Control
32-bit I/O
Description
When set to IDE, the SATA controller
disables its RAID and AHCI functions
and runs in the IDE emulation mode.
You will not have access to the RAID
setup utility.
When set to AHCI, the SATA
controller enables its AHCI
functionality. However, its RAID
functions will be disabled and you
will not be able to access the RAID
setup utility at boot time. For more
information on AHCI, refer to the
SATA AHCI Mode BIOS feature.
When set to RAID, the SATA
controller enables both its RAID and
AHCI functions. You are allowed to
access the RAID setup utility at boot
time.
Press <Enter> to configure the advanced HDD.
Press the space bar to configure this
parameter.
Specifies the number of sectors per
block for multiple sector transfers.
Enabling the LBA causes Logical Block
Addressing to be used in place of
Cylinders, Heads & Sectors (CHS).
Enables/disables 32-bit IDE data
transfers.
4 System BIOS
Options
IDE
RAID
ACHI
Auto
None
CD-ROM
Other ATAPI
User
Disabled
2 Sectors
4 Sectors
8 Sectors
16 Sectors
Enabled
Disabled
Enabled
Disabled