Configuring the BMC NIC settings
You can configure the BMC NIC settings using DHCP or static IP
addressing.
Configuring the BMC NIC settings using DHCP
1
Enter the BIOS setup (see "Entering BIOS Setup" on page 55).
2
Select Server Management menu.
3
Select System Information then press <Enter>.
4
Select BMC IP Address Source then press <Enter>.
5
Select DHCP.
6
Press <F10>.
7
Select Yes to save the modified password and close the Setup
Utility.
Configuring the BMC NIC settings using a static IP address
1
Enter the BIOS setup (see "Entering BIOS Setup" on page 55).
2
Select Server Management menu.
3
Select System Information then press <Enter>.
4
Select BMC IP Address Source then press <Enter>.
120