JKEXER Turbo 772 Owner's Manual page 9

MAIN FRAME
BOLT & WASHER (C)
PHOTO (4-2)
RIGHT
Step 4.
4-1. Mount the Computer (3) at the top of two Front Posts (2). 2 curved ends of the
computer should match two sides of handlebars at the top of Front Post (2).
4-2. Remove the cap on the handlebar, then well connect 3 cables from Computer
(3) to the cables from right Front Post (2), and 1 cable from Computer (3) to the
cable from left Front Post (2). Then push all cables back into handlebar then put
the caps back on the handlebar.
Step 3.
Use Bolt + Washer (C) to fix 2 Front Posts
FRONT POST
(2) to the Main Frame (1). Do not tighten
yet.
COMPUTER
LEFT
PHOTO (4-1)
COMPUTER
HANDLEBAR
7