Sony VGX-XL2 User Guide (Computer Component) User Manual page 88

3 From the Access Control Settings tab, select the check box
computer from other devices connected to the
4 Select the option,
devices
access to the server.
Note: To allow VAIO
all connectable devices to access this
5 Click Register. The VAIO Media™ Registration wizard appears. Sony
recommends selecting the option
connected to the
6 Click Next. Registration requests from network clients or devices appear.
If you want to use a confirmation number to register your computer, verify that
the Use the confirmation number to register your device
selected.
Note: Standby mode is automatically canceled five minutes after clicking
Next.
7 From the server computer, accept the new client.
As the server and client computers recognize each other, the server computer
generates a four-digit number for the client. Type this number on the client
machine. Each client computer has a unique number that cannot be used by
the other clients on the network.
Note: If the registration process is cancelled, no number is generated. The
registration process must begin again for that client computer.
8 Restart the client computer, if necessary. A new icon,
on the client's desktop.
The installation is complete and the registered client computer can access
media files stored on the VAIO Media™ server.
Preparing Your Multimedia Content
You can use pre installed Sony® software programs to prepare your
multimedia content for sharing across the network using VAIO Media™
software.
VGX-XL2A Digital Living System
Restrict access to this computer to manually registered
[Recommended]. This option only allows registered computers
®
computer access to the server, select the option
network.
network.
computer.
Automatically register devices when
Access this
Allow
option is
VAIO Media™, appears
85