Inserting A Memory Card - Sony VGX-XL2 User Guide (Computer Component) User Manual

Inserting a Memory Card

The memory card reader(s) are located behind a protective cover on the front
of the computer. To access the Memory Card Readers, flip the front cover
down.
To insert Memory Cards
1 From the front panel, locate the appropriate reader(s) for the memory card(s)
you want to use.
2 Insert the memory card into the reader, in the direction indicated of the arrow
on the media. Do not force the card into the reader.
Note: If the memory card does not go in easily, gently remove the card and
verify you are entering the card in the proper direction.
To Protect data on Memory Stick
Some Memory Stick
protect tab prevents accidental changes to information recorded on your
Memory Stick media. When you slide the write-protect tab to the
position, your Memory Stick
copy, or save information on the media while the write-protect tab in the
LOCK
write to or modify your Memory Stick media's contents.
Locking the Memory Stick
If your computer stops recognizing your Memory Stick
removed the media from the Memory Stick drive before the data access
process completed. If this occurs, follow these steps:
1 Remove the Memory Stick
2 Shut down your computer, closing any open software programs, and then turn
your computer off.
3 Wait approximately 30 seconds, and then restart your computer.
Your computer recognizes the Memory Stick
the Memory Stick slot again.
14
®
media are equipped with a write-protect tab
position. When you slide the tab to the
®
Media
®
media is write-protected. You cannot delete,
®
®
media from the slot.
®
LOCK
un-LOCK position, you can
®
media, you may have
media, when you insert it into
VGX-XL2A Digital Living System
. The write
*