Sony VGX-XL2 User Guide (Computer Component) User Manual page 152

The computer restarts and displays a page with the following VAIO
options:
• Restore C: Drive
• Restore Complete System
• Reconfigure RAID
5 Click Reconfigure
A Reconfigure RAID page displays. Read the information.
6 Click Next.
Note: If for any reason a RAID array cannot be deleted, a message displays
stating "No RAID Array Detected." Click
click Back
The Reconfigure RAID (Step 1 of 1) screen displays. Read the information on
the screen including the WARNING statement.
7 Select the
The VAIO
hard disk drive. When complete, a message displays with instructions on
completing the process.
8 Leave the disc in the optical drive and click OK.
The computer restarts and displays a screen with the following options:
• Restore C: Drive
• Restore Complete System
• Reconfigure RAID
9 Click Restore Complete System to restore all original factory-installed
software.
See Restore Complete System for step-by-step instructions to perform this
procedure.
10 When complete, start the Intel
RAID array(s), as desired.
11 See Intel
VGX-XL2A Digital Living System
RAID.
to return to the previous screen.
I understand check box and click Next.
®
Recovery program automatically deletes all RAID arrays on the
®
Matrix Storage Console, for additional informaiton.
OK to close the message and then
®
Matrix Storage Console and configure your
®
Recovery
149