Setting Up The Remote Control - Sony VGX-XL2 User Guide (Computer Component) User Manual

®
VAIO Remote Control

Setting Up the Remote Control

1 Start
VIDEO
place your computer in Standby mode.
2 Control the playback for TV, MUSIC, VIDEOS,
and ends a slide show. Buttons include:
STOP, PAUSE, FWD, SKIP, REPLAY, REW,
and RECORD. The right arrow button serves
as a
3 Use the arrow buttons to move to a specific
location, the
selection, the
previous screen, and the
view additional information.
4 Use the
Volume Controls (VOL) are on the left and
Channel
the
provided to suppress sound.
Follow the steps below to preset the MCE
remote control for TV volume.
5 Open the following screens
GUIDE,
available only when Media Center is active.)
6 Use these buttons to change channels and
enter text or numbers in a specific location.
VGX-XL2A Digital Living System
MY TV, MY MUSIC,
in Media Center. Press
PLAY button.
OK button to make your
BACK
START button to open Media Center.
(CH) or Page
START button. A
1 Locate the input code number by
selecting your specific manufacturer.
MCE (RC6) Default: 01
Sony: 02
Samsung: 03,05,06,08,11 or 13
Toshiba: 07 or 09
Panasonic: 04 or 10
Sharp: 07 or 12
2 On the remote control, press and hold the
OK button. Then type the input code no.
LIVE TV, DVD
MY PICTURES,
STANDBY
button to go to the
MORE button to
(PG) on the right of
MUTE button is also
RECORDED
MENU. (DVD MENU
MY
to
TV,
is
7