Sony VGX-XL2 User Guide (Computer Component) User Manual page 79

Setting
Invalid
WEP
WPA-PSK
76
Description
Security settings can't be set.
The transmitted packets are encrypted using WEP.
Select the authentication method in Authentication.
Open System:
This does not authenticate when connecting to the
access point. However, the network key is required to
decode the communication data.
If the network key is wrong, you are able to connect to
the access point, but unable to communicate.
Shared Key:
Authentication can be done using the network key
when connecting to the access point. A network key
is required for both authentication and encoding the
communication data.
If the network key is wrong, you are unable to connect
to the access point (authentication failed).
Automatic Switch:
The client determines whether to use a shared key,
and is able to connect to the access point.
WEP Key Settings:
Key 1 - key 4 are able to be set.
When the client is set to WPA, the access point can
be connected.
VGX-XL2A Digital Living System