Wireless Network - Sony VGX-XL2 User Guide (Computer Component) User Manual

Wireless Network

Connect the WLAN antenna (included) to the connector on the back panel of
the XL2A computer.
For better reception, if needed, you may mount the wireless LAN antenna to a
wall using the included screws.
®
Launch the Marvell Client Utility Application. Click the Windows Start button.
®
Then select All Programs > Marvell Wireless SoftAP. Select Station as the
operation mode. Then proceed to Windows Wireless Zero Configuration
service to set up your connection with your preferred Access Point. For
additional information about setting up a wireless LAN, go to Appendix A.
VGX-XL2A Digital Living System 35