Sony VGX-XL2 User Guide (Computer Component) User Manual page 20

USB 2.0 (x2) Universal Serial Bus
Connects to a device which supports the USB standard.
The connector supports the USB 2.0 standard and can also be connected to
a device which supports the USB 1.1 standard.
Optical S/PDIF IN
Connection for Audio In.
i.LINK
Your VAIO
(back panel) i.LINK
connected i.LINK
to a connected i.LINK
connector.
Optical S/PDIF OUT & Coaxial S/PDIF OUT
Connections for Audio Out.
Wireless LAN Antenna
Connection for Wireless LAN Antenna.
Infrared Transmitter OUT (x2)
Controls VCR, Setup box, and other devices in MCE.
Component Video OUT (480i, 480p,720p)
Connections for Video Out.
Power Cord
Connection for supplied power cord.
1. i.LINK is a trademark of Sony used only to designate that a product con-
VGX-XL2A Digital Living System
1
®
(x2)
®
computer is equipped with one 4-pin (front panel) and two 6-pin
®
ports. A 4-pin i.LINK port cannot supply power to a
®
device. A 6-pin i.LINK port can supply power (10V to 12V)
®
device, if the device is equipped with a 6-pin
tains an IEEE1394 connection. The i.LINK connection may vary depend-
ing on the software applications, operating system and compatible i.LINK
devices. All products with an i.LINK connection may not communicate with
each other. Please refer to the documentation that comes with any device
having an i.LINK connection for information on compatibility, operating
conditions and proper connection. For information on any Sony device
having an i.LINK connection, contact Sony at 1-800-686-7669.
17