Supervisor Password; Setting And Changing The Password - Acer Altos 600 Series User Manual

74

Supervisor password

Setting and changing the password

To set or change a supervisor password:
1. Enable the Supervisor Password parameter in the System Security menu b
pressing the Up or Down arrow key to select Present. The Supervisor
Password window appears:
2. Type a password. The password may consist of up to seven characters.
Note: Be very careful when typing your password because the actual
characters do not appear on the screen.
3. Press the Enter key. Retype the password to verify your first entry then press
Enter.
4. Highlight the "Set or Change Password" option and press the Enter key.
5. Press the Esc key to return to the System Security screen.
6. Press the Esc key to exit Setup. The Exit Setup screen appears.
7. Choose "Yes" to save your settings and exit Setup. Your password will be
saved to CMOS.
Chapter 4 BIOS Utility