Installing An External Redundant System Fan (Optional) - Acer Altos 600 Series User Manual

Installing an external redundant system
fan (optional)
An additional external redundant fan can be installed behind the system housing.
This allows the system to operate properly even if the internal housing fan fails.
To install an external redundant fan:
1. Open the front panel and remove the left panel of the housing. See page 33
for more information.
2. Use the screwdriver to push open the plastic peg located below the internal
system fan module.
3. Insert the redundant fan into the fan cage and attach the fan cage to the system
housing with four screws.
4. Insert the fan cable (CNX7) into the peg hole and attach the cable to the
system board. See the section "System Board Layout" for the location of this
fan cable.
49