Advanced Configuration Options - Acer Altos 600 Series User Manual

SCSI controller, the Start Unit Command is sent to the next highest SCSI ID with a
setting of yes. The process continues until all supported devices respond to the
SCSI controller.
If many drives are set to yes for Send Start Unit Command, the boot time
varies depending on how long it takes each drive to spin up

Advanced Configuration Options

When you select Advanced Configuration Options, the Advanced Configuration
Options a screen appears.
The default values for the AIC 7899 SCSI Advanced Configuration are:
Advanced Configuration
Reset SCSI Bus at IC Initialization
Display Ctrl A Message During BIOS
Initialization
Extended BIOS Translation for DOS
Drivers > 1 G byte
Verbose/Silent Mode
Host Adapter BIOS
Support Removable Disks Under
BIOS as Fixed Disks
BIOS Support for Bootable CD-ROM
BIOS Support for Int13 Extensions
Do not change the default values in this screen unless absolutely necessary.
Host Adapter BIOS
This option enables or disables the SCSI controller BIOS. The default setting is
Enabled.
The SCSI controller BIOS must be enabled if you want the computer to boot from
a SCSI hard disk drive connected to the SCSI controller. Several SCSISelect
options cannot be used unless the SCSI controller BIOS is enabled.
Default Value
Enabled
Enabled
Enabled
Verbose
Enabled
Enabled
Enabled
Enabled
97