Scsiselect Utility; Overview; Default Values - Acer Altos 600 Series User Manual

SCSI Select Utility

Overview

The SCSISelect utility allows you to change SCSI controller settings without
opening the computer or changing jumpers.

Default Values

The following table lists the settings you can change with the SCSISelect utility
and the default value for each setting. Some settings apply globally to the SCSI
controller and all SCSI devices on the bus; other settings apply individually to each
device on the bus.
Global Settings for SCSI Controller and All Devices
Host Adapter SCSI ID
SCSI Parity Checking
Host Adapter SCSI Termination
Boot Channel/ Boot SCSI I/O
Host Adapter BIOS
Sync Transfer Rate (MB/sec)
Support Removable Disks Under BIOS as Fixed Disks
1
Chapter 5
Default Value
7
Enabled
Enabled
A First/0 (zero)
Enabled
160
Boot only
91