Acer Altos 600 Series User Manual page 80

66
Parameter
System sleep
timer
Sleep mode
Power switch < 4
sec.
System wake-up
event
Modem ring
indicator
PCI power
management
RTC alarm
Resume day
Resume time
Description
This parameter sets the system to the lowest
power-saving mode after a specified period of
inactivity. Any keyboard or mouse action or any
activity detected from the IRQ channels resumes
system operation
Lets you specify the power-saving mode that the
system will enter after a specified period of
inactivity.
This parameter becomes configurable only if the
System Sleep Timer is on. Any keyboard o
mouse action, or any enabled monitored activities
occurring through the IRQ channels resume
system operation
When set to Power Off, the system automatically
turns off when the power switch is pressed for less
than 4 seconds. When set to Suspend, the system
enters the suspend mode when the power switch is
pressed for less than 4 seconds
The system wake-up event allows the system to
resume operation when the modem ring indicator
is enabled
When Enabled, any fax/modem activity wakes up
the system from suspend mode
Enables or disabled the PCI power managment
function
Allows you to set a certain time on a certain day to
wake-up your system from suspend mode
If RTC alarm is enabled, the system will resume
operation on the day indicated here
If RTC alarm is enabled, the system will resume
operation at the time indicated here
Chapter 4 BIOS Utility
Option
Off
On
Standby
Suspend
Power off
Suspend
Enabled
Disabled
Enabled
Disabled
Disabled
Enabled
User input
User input