36
6.
Insert the new drive into the drive bay and secure it with the two screws
removed in step 3.
7.
Connect the power cable and the signal cable to the drive.
8.
Reinstall the side panel.
Installing a BPL5-M hot-swap cage
The BPL5-M hot-swap cage box includes the following components:
•
One hot-swap cage (with backplane board attached)
•
Five hard disk drive trays
•
One system board connector cable
•
Two hard disk drive fault LED connector cables
To install the hot-swap cage into the housing:
1.
Open the front panel door and remove the side panel. See page 33 for more
information.
Chapter 3 Upgrading Your System