Advertisement
1. Grasp bag handle and slide locking rod on
1
mounting bracket toward engine.
2. Slip bag over rim of discharge opening and
release locking rod.
3. Snap bag clip to top of lower handle.
4. Hook lower straps onto studs on lower handle
3
2
1
4
To Adjust Nozzle Height:
2
1. Press nozzle height adjustment lever
toward wheel.
2. Move lever forward or backward to
adjust upward or downward.
3. Release lever toward deck to secure.
2
3
© 2019 24A-060
CRAFTSMAN and the CRAFTSMAN logo are trademarks of Stanley Black & Decker, Inc. or an affiliate thereof and are used under license.
IMPORTANT: READ OPERATOR'S MANUAL AND ENGINE MANUAL THOROUGHLY
AND FOLLOW THE IMPORTANT SAFE OPERATION PRACTICES BEFORE OPERATING.
READ AND UNDERSTAND ALL INSTRUCTION, WARNING, AND DANGER LABELS.
READ AND UNDERSTAND ALL INSTRUCTION, WARNING AND DANGER LABELS.
PARA INSTRUCCIONES EN ESPAÑOL, REFIÉRASE AL MANUAL DEL OPERADOR.
PARA INSTRUCCIONES EN ESPAÑOL, REFIÉRASE AL MANUAL DEL OPERADOR.
Oil Fill
1
Fast Start Guide - Assembly/Engine
Gas Cap
Spark Plug
Boot
•
Pour the entire contents of the oil bottle
(included in carton) into the oil fill.
•
Fill fuel tank with clean, fresh gasoline. Do not
over-fill tank.
Bag/chute switch must be fully
depressed for engine to start. Make
sure bag/chute wire is connected
to engine and grounded to
mounting bracket.
Top View
Front Tab
Bag/Chute
Switch Wire
Need Help?
www.CRAFTSMAN.com or Call 1-888-331-4569
3
4
Side View
778-15437A
Advertisement
