Component Identification - Landa PE Operator's Manual

Water Supply Hose
(not included)
Start/Stop
Switches
Power
Supply
GFCI
Power
Nozzle
Cord
Quick
Coupler
Detergent Injector - Allows you to siphon and mix
detergents.
High Pressure Hose - Connect one end to water
pump discharge nipple and the other end to spray gun.
Nozzle Quick Coupler - To easily connect the high
pressure hose and soap nozzle to wand.
Oil Level Sight Glass - A quick visual reference to
the oil level in the pump.
Pump - Develops high pressure.
Pump Protector - Cycles fresh cool water through
pump when recirculating water reaches 140°F.

COMPONENT IDENTIFICATION

Oil Level
Sight Glass
Pump Protector
Oil
Dipstick
Pressure Nozzle
Soap
Nozzle
LANDA PE 8.913-998.0
Pump
Detergent
Tube
Wand
Trigger
High Pressure Hose
Spray Gun - Must be connected to the high pressure
hose and wand.
Swivel Connector - Connects to the spray gun and
wand. Minimizes hassle of hose coiling.
Wand - Must be connected to the spray gun.
Note: If trigger on spray gun is released for more
than 1-2 minutes, water will leak from valve. Warm
water will discharge from pump protector onto
floor. This system prevents internal pump damage.
Detergent
Injector
Inlet
Connector
Detergent Bucket
(not included)
Spray
Gun
Swivel
Connector
5