Nidec M700 Instruction Manual
Ac and servo inverters for manufacturing automation
Hide thumbs
Also See for M700:
- Parameter manual (384 pages) ,
- User manual (216 pages) ,
- Design manual (344 pages)
Related Manuals for Nidec M700
Summary of Contents for Nidec M700
- Page 1 M700 / M702 AC and servo inverters for manufacturing automation Instruction manual Basic M700 Demo Drive and Motor Setup using MConnect Software Distributor for:...
- Page 2 EPA Drives Thank you for choosing to work with EPA! EPA - your competent partner for Nidec / Control Techniques when it comes to individual service & comprehensive services. If you have any questions about the product, please feel free to call us: Tel: +49 (0)6181 –...
- Page 3 Basic M700 Demo Drive and Motor Setup using MConnect Software This application note will demonstrate how to set up the M700 demo for Analog Velocity Mode using MConnect software. The application note will focus specifically on using the MConnect software and will assume the user has an Ethernet patch cable connected to the drive with a PC static IP address set to be able to communicate to drive IP address 192.168.1.100 along with a M700 demo unit connected...
- Page 4 In the top right corner select ‘Add drive’: Enter an optional ‘Name’ and make selections for the Model, Mode, Region, and Communications as shown below. When finished select ‘Ok’: 7078 Shady Oak Road, Eden Prairie, MN 55344-3505 +1 952 995-8000 www.controltechniques.com...
- Page 5 Select ‘Help’ in the ‘File’ tab above to access the third pane in MConnect software that has useful parameter information while navigating through the MConnect project: In the drive Dashboard expand Setup and select ‘Motor Setup’ 7078 Shady Oak Road, Eden Prairie, MN 55344-3505 +1 952 995-8000 www.controltechniques.com...
- Page 6 Select ‘Choose a motor’, scroll down the list and select 067EDA300 shown below and select ‘OK’: Select ‘Save to project’ in the upper right hand corner to save the motor data to the project: 7078 Shady Oak Road, Eden Prairie, MN 55344-3505 +1 952 995-8000 www.controltechniques.com...
- Page 7 In the drive Dashboard expand ‘Setup’ and select ‘Motor Feedback Setup’: Make the Drive P1 setup selections as shown below. Then select ‘Save to project’: 7078 Shady Oak Road, Eden Prairie, MN 55344-3505 +1 952 995-8000 www.controltechniques.com...
- Page 8 Select the ‘Ethernet’ icon below in the Drive dashboard. Expand ‘Parameters’ and Select ‘Menu 4.02 Ethernet : Configuration’: Uncheck the box shown below to turn ‘DHCP’ Enable ‘Off’ in Pr 4.02.005: 7078 Shady Oak Road, Eden Prairie, MN 55344-3505 +1 952 995-8000 www.controltechniques.com...
- Page 9 Select the ‘Drive’ Keypad Icon to go back to the Drive Dashboard and select ‘Online’ Once successfully Online with the drive the drive name, IP address, and the Drive Dashboard will be highlighted in Green. The ‘Online’ button will be illuminated yellow as shown: 7078 Shady Oak Road, Eden Prairie, MN 55344-3505 +1 952 995-8000 www.controltechniques.com...
- Page 10 Select ‘Download to drive’ to download the project setup: When prompted to ‘Overwrite drive parameters?’ select ‘Yes’: 7078 Shady Oak Road, Eden Prairie, MN 55344-3505 +1 952 995-8000 www.controltechniques.com...
- Page 11 In the Drive dashboard expand ‘Setup’ and select ‘Autotune’: For best results select type ‘2. Rotating’. Then select ‘Next’: 7078 Shady Oak Road, Eden Prairie, MN 55344-3505 +1 952 995-8000 www.controltechniques.com...
- Page 12 At this point it is optional to select ‘Save parameters in drive’. Then select ‘Next’. Follow the Online prompt and activate drive enable (T31) to begin the rotating Autotune: Below is Autotune in progress: Below is Autotune complete 7078 Shady Oak Road, Eden Prairie, MN 55344-3505 +1 952 995-8000 www.controltechniques.com...
- Page 13 Select ‘Next’ to view the changed parameters in the drive as a result of performing a rotating Autotune. Select ‘Save parameters in drive’ to save the parameter changes: At this point all of the changes made from performing the Autotune are saved in the drive, however, these changes do not reside in the MConnect project.
- Page 14 CW (full motor speed) in the direction selected, and will provide the required analog speed command. Resources: can be found on our website: www.controltechniques.com For help contact techsupport.cta@mail.nidec.com, or call Technical Support at 952-995-8000, 24/7/365 7078 Shady Oak Road, Eden Prairie, MN 55344-3505 +1 952 995-8000...