Installation procedures
1.
2.
USB connection
Following the installation procedures, connect the USB cable included to the PC.
The USB connector of the TM200 is mini-B TYPE.
7
Access the driver download page using your Internet browser.
In the lower part of this page, there is a table called "Currently Supported VCP Drivers".
From this table, select between OS (Windows) 32 bit or 64 bit and download the file.
In the downloaded zip file, there is a file with CDM name xxx.exe (xxx differs
depending on the file version downloaded). Execute this file to begin the driver
installation.
3 Setting Procedures
7
Chapter
3